AE&D / OFFICIAL BROWSER-BASED FIRMWARE INSTALLER
Connect. Flash.
Bring hardware to life.
Official firmware, installed straight from your browser. No IDE. No build environment. Just your device and a USB cable.
Firmware installer
BETAChoose a firmware to see compatibility and release notes.
Connect the board by USB only when ready.
Hardware access is only requested by your browser after clicking the button. The firmware binary is downloaded from AE&D and verified against its SHA-256 checksum before writing.
Technical log
Firmware Studio initialized.
THREE STEPS
Firmware, minus the friction.
Select
Choose your AE&D product, release and verified hardware profile.
Connect
Put the board in its specified bootloader mode and authorize USB access.
Install
Write and verify the compiled image, then reboot the device.
ABOUT FIRMWARE STUDIO
Official AE&D firmware updates, directly from your browser.
Firmware Studio is the browser-based firmware installer for supported AE&D electronics. Choose an official published firmware release and the matching hardware profile, connect the device with USB, then let your browser program the verified firmware image.
Supported programming methods include RP2040/RP2350 PICOBOOT over WebUSB and ATmega328P Optiboot/STK500v1 over Web Serial. Availability depends on your exact board, firmware release and bootloader. Use a compatible desktop Chrome or Edge browser over HTTPS.